Moderustic Aquatic Glassel Fireplace Glass Rocks Propane Fireplaces

Propane Burners..

Patent Ownership and disclaimer

Lantern VortexED (moderustic.com)

Investors Page Information

Some of Ed's project cars For Sale

These have been long awaited and these are manufactured by Moderustic for Aquatic Glassel.

These are our new propane burners for fire pits with use with PROPANE. These are our FPPK models (fire pit propane kit)

They are as follows:

18" pan with a 12" burner

24" pan with a 18" burner

30" pan with a 24" burner

We can build any size, shape, material you can design or dream of. We are the only company in the world offering custom tailor made propane burners fit to your needs and or designs.

Burners don't come with the copper pan.unless specified.

The remote box has an electronic (battery) starter and a variable fuel valve. Propane must be mixed with air (air mixer valve/ venturi) to insure a clean bur without soot! If you burn straight propane you will experience black smoke/ soot and this is not good. We have worked on the development for several months now on these burners and they are now ready for you.

The picture on the lower left is of a possibility for the new burners. You can mount these into any table. With this in mind when we designed these we wanted the customer to be able to build or design any base, table or fire pit to install a propane burner.

Fireplace Glass, Fireplaces Design, Fire Glass, Fire Pit Glass. Fireglass, Fire Glass

The picture on the right is of the bottom side of the control box.

fp 1 fp 2

The left picture is of the control box with the air mixer. The picture on the right is of the ring and base plate which prevents the propane from sinking.

fp 3 fp 4

Below on the right are the thermo-coupler and electronic starter. The thermocouple is the safety switch which if the fire is blown out and leaving the thermocouple cold will shut your system off for safety reasons.

fp 5 fp 6

Here are the first of our propane pan burner pictures and more details will follow. These have been replaced with a better and improved newer style burner. We will post in the next week or so the new pictures and details.

propane pan 1 propane pan 2

We will be posting on the new generation of propane pan burners.

These burners cone in 18", 24" and 30". When ordering please specify if the connector is on the left or right side.

with remote (optional) The pictures of the remote control will follow in the days to follow.

Our propane Fire Pit burners come in 2 sizes, 12", 18" and 24".

propane pan

The new propane burner shown is a 12" with an 18" base and these will be out in a few weeks.

This is a 24" ring on a 30" base. The base is detached for remote locating.

propane ring

We are taking order for the burners as they are being built as ordered. Manufacturing time is about ten days and they ship the same day as of completed.

The pan burner below is for a 2 sided fireplace and this pan is 25" x 45" and controlled from only one side. It is constructed from 16 gauge brushed stainless steel with 3" x 3" x 3" corner legs.

laura 1 laura 2

laura 3 laura 4

The picture on the bottom left shows you the thermocouple and safety pilot light kit which are UL and CSA approved.

laura 5 laura 6

laura 7 laura 8

This is one side of the two sided fireplace and we will post pictures when the glass is installed of both sides.

laura 9 laura 10

he fire pit below has a 1/4" Clear, 1/2" Clear Base with Red Orange Topping, Emerald Green Topping and Light Sky Blue Topping. The was a basic wood burning fire pit purchased locally and converted with our fire pit propane kit (FPPK)

The fire table below has a propane burner and is not configured correctly. That is why you will see soot (carbon monoxide) the black stuff on the glass. If you purchased a table from one of these clowns that have you connect a propane tank to a burner ring, you will have problems. We use all the proper safety valves and air mixers to insure a clean and safe burn. See our propane page. We are the only company manufacturing a propane burner that is safe and built correctly for these fire tables when you are using our glass. The glass used was Starfire and Pale Blue Topper. Since and after the install we did supply the correct burner and it is burning clean as it should be.

As you can see after burning for about 10 minutes the soot is and will be an issue. Carbon monoxide IS NOT GOOD FOR YOU!

Below is a 36" aluminum pan burner for propane with a 3" outside lip. These can be made to fit any fire pit, fire table of fire fit for natural gas or propane. We can build anything! This pan has a thermo-coupler for safety and air mixer built in to eliminate soot.

The fireplace below has Bronze, Bronze Reflective, Ice, Gold and Yellow Amber Topper. This fireplace is in Shawano, Wisconsin at the Cotton Patch Restaurant. E mail Patti and tell here you saw her fireplace.

Now for the after pictures! This was a custom propane burner which was under all of the glass!

This is what Patti had to say:

Hi Ed,

Well, it's been about two weeks since I installed the new fireplace, and it is the talk of this sleepy little town. Because of the "Ice" on the top, it has been nicknamed the "Fire and Ice" fireplace. I just placed an order for a pound each of 1/4" Gold, Yellow Amber Topper and Clear Ice. I think it needs a smidgen more color, and since the Ice is the big feature, I decided to add a little more. I have to say, I didn't think I would like the ice, but it looks amazing!

Thank you Ed and Jimmy for all of your help and hand holding over the past few months. I will take more pictures when I add the new products.

Thanks again,

Patti

arnev@frontiernet.net

The fireplace below is a propane burner, self installation with the 2" method, Starfire and Gold on top

jr 1 jr 3

Above we have the old burner with a smaller flame pattern which we will change to a double burner in our tray propane pan burner

jr 5 jr 4

A little bit of cleaning with a wire brush and 1200 degree paint

jr 6 jr 7

We filled the bottom with pea gravel and the covered it with sand

jr 8 jr 9

Then we installed the propane burner and filler it with pea gravel to the top of the burners

jr 10 jr 11

You can see the pilot light and thermo-coupler exposed

jr 12 jr 13

So there it is. A clean burning propane burner, 2" method, no soot, no smells, no carbon monoxide and it puts out a tremendous amount of heat. We sell the 2" method because it works and if anyone tries to tell you different, they need your money more than you do. We are the only company building propane burners for glass that don't soot or smell!

These are our round ring burners with out the center hub and these can be made in any size in steel or stainless steel

10 inch 1 10 inch 2

10 inch 3

The pan below is a brushed aluminum pan with sculpted legs. This pan is for propane and now we offer a simple adapter to convert this to remote control from the back side (battery operated). The glass installed is a multi mix for the photo shoot only. The pan is 2" with 3" legs. This pan will be installed in Cabo San Lucas, Mexico

alum 1 alum 2

alum 3 alum 4

alum 5 alum 6

alum 7 alum 8

alum 9 alum 10

alum 11 alum 12

alum 13 alum 14

The fire pit below shows our FPPK (fire pit propane kit) a 30" base with a double 24" stainless steel burner. You will notice the igniter and thermo coupler (heat switch for safety). The base plate is to prevent propane from leaking into the fire pit below.

bm 1 bm 2

bm 3

The propane conversion was here in Southern California. Crista brought the bowl and we did the rest.

crista 5 crista 6

Crista brought the top pan and lid and we installed a propane burner We installed one of our FPPK kits (fire pit propane kit)

crista 2 crista 3

crista 1 cb 7

This is the table Crista built to hold the copper pan/ bowl

cb 1 cb 2

The ventless burner below is 1 of 3 that were sent to Georgia. The glass that we tested was Multi Mix. We show the burner finished, with the burners exposed, burning and with glass, We will post the pictures of the finished fireplace when the customer send them to us to post. This is a propane ventless burner and these also are made in natural gas as well.

Notice the stainless box tray underneath the upper pan.

If you dream it, design it, think of it, we can build it as we are the innovators in the industry which seem to some how give licence for most to try to copy us and our products and designs. What is important that you know who we are!

The vent less burner below is made of steel and there were actually 4 of these made. We covered the front and sides with 5" skirts. There are being installed in Georgia and as soon as they send pictures we will post them These pictures were taken just after the testing. This is a propane vent less burner and these are available in natural gas as well.

The pictures below are of the same burner as above with Azurlite installed. These 4 ventless burners are being installed in Georgia.

The skirts will hide the the valves and the remote control will be moved to the side of the fireplace. This was a vent less burner the customer sent to us for conversion and they asked for us to add a remote to all 4 vent less burners.

The fire pit/ table is at the Roxbury Hotel and we will show you the progress here from beginning to end. This was a propane installation with our FPPK burner. The colors used were:

1/4" Starfire, 1/2" Starfire, Gold, Lime Green Topper, Pale Olive Green Topper, Olive Green Topper,a little bit of wood and tile and here you go!

Above shows the framing and the gas line coming in.

Below shows the pipe coming out of the floor and the thermo-coupler on the glass next to the igniter

Roxbury Hotel, a cool fire pit!

The propane vent less burner below shows where the sensor has to be and how it works. This is a stainless steel pan with Gold glass for the test burn.

The 9 pictures below are of a steel propane ventless burner. We used the original burner and installed an air mixer under the pan to insure a clean burn. As you will see the thermo-coupler, pilot light and ODS (oxygen depletion sensor are intact). These pans can be made in any shape or material.

What ever burner you purchase with or without remote control, we can convert it for you. Propane or natural gas, vented, direct vent or vent less as shown.

The flat pan below has a propane burner installed for a fire pit. These are made in any size, shape or burn pattern. The one shown below is an electronic ignition control and these can be adapted with manual ignition as well. This was build for a designer in New York and placed on a shelf of the fireplace.

The pan burner below is a stainless steel/ propane pan for outdoors and we have installed an electronic ignition under the pan. These can also be made for natural gas.

The fireplace below is in San Diego, California and the colors used were:

Cobalt Blue Topper

Steel Blue Topper

Cranberry Pink Topping

Purple Topper

Lilac Topper

Deep Royal Topping

Clear Base

Solex and Solex Reflective

Azurlite and Azurlite Reflective

Blue Green and Blue Green Reflective

and a little bit of Ice Ice Ice on top

wow!

The end pictures show that the burner was too close the wall which was an easy fix by moving the burner forward.

This is where is went a little bit wrong, oops. We just had them move the burner forward and now its fine and the back wall was repainted.

The fire pit below is a failed attempt of a propane conversion without our help in the beginning. You can't just burn propane! If you try this, this is what it will look like. You need to calibrate the amount of air to propane or it will back fire, burn black or explode! We recommend a thermo coupler, air mixer/ venturi along with several other important factors. We won't tell you who tried this but we will tell you we did fix the issue and now the customer is very happy. We did use Azurlite with Azurlite Reflective.

stan 1 stan 2

stan 3 stan 4

stan 5 stan 6

stan 7 stan 8

stan 9 stan 11

stan 12 stan 13

The fireplace below is a propane pan burner with a lava rock fill. You don't want to crush your own lava rock because of the time. You can use larger lava around the edges of the pan but you will want to use crushed lava in the pan up to the surface of the burners. The glass use in this fireplace was a Ford Blue base with Ford Blue Reflective on top. Topped with Clear Pyrite and Amber accents. The install went very well except for the rock crushing episode.

This new product will allow you to convert any table into a fire table. We can build these with a natural gas burner or even a propane burner. We can add fibre optics, water, fire, Fire Stones, Fire Balls, Fire Shapes, lava, sand, glass or anything else you can dream of. These are the first pictures of these bowl which come in dozens of sizes. The glass that was used in this bowl was Dark Red Orange Topper and Yellow Amber Topper. This bowl was set up with one of our 12" FPPK propane burners.

We will be posting our bowl sizes in standard and as for custom we can make anything. We will also be posting dozens of pictures of the other projects as we have time, like we didn't post enough already?

The fire pit below has a "FPPK" propane burner installed and the burners were exchanged out for stainless steel. If you were to leave the steel burners in you will eventually have rust pouring out of your fire pit onto the patio which will not look very attractive! The glass used was 1/2" Gray and Ford Blue. The controls were inside the bottom housing, nice fire pit but almost a big oops.

prud 1

nice design.

prud 2

below you can see where the controls were to be mounted

prud 3

prud 4

above you can see the steel ready to rust and make a mess. Remember you get what you pay for.

prud 5

The burner below has a 300,000 BTU controller, 36" triple ring mounted on a 48" aluminum base plate for a fire pit in San Diego. These can be adapted for natural gas or propane with up to a 96" lead pilot light and igniter.

The propane burner below was made to inset flush to the floor with a remote control underneath the pan. The pan sat 5" below the surface so the glass would appear to be just above the surface. The outer ring was bolted down to keep the glass from falling underneath the burner in the event you ever had to service the burner or remote control. The tower you see is actually for the air mixer to draft fresh air to the propane before it burns.

As you can see we drilled it to look like a ribbon burner. This is what was ordered by the customer.

The fireplace below is in Mexico where we seem to be sending more and more propane burners and glass for the new homes being built there. The fireplace below has a Black base glass with Ice Ice Ice on top of one of our propane pan burners. Which later a remote control was added by the custom that we sent to them.

The fireplace below was installed by the customer (Kim Clark) with a remote control, propane burner manufactured by us and topped with Starfire. The fireplace was transformed form an ordinary to work of art, nice job!

The picture below has the burner being tested

This is the remote control on the lower right with the pilot light assembly

We now have fire!

The round pan below is a propane pan with electronic ignition. This is a 36" aluminum pan with a 2" lip all around

round aluminum pan 1

round aluminum pan 2

round aluminum pan 4

The two pans below are stainless steel and are propane fueled with 415,000 BTU electronic ignitions each.

twin propane fire pans 1 twin propane fire pans 2

twin propane fire pans 3

The pictures below will show you how to install a propane burner and valve in your fire pit without drilling a hole in the side of your fire pit with our FPPK (fire pit propane kit). This was install in Calabasas California with Bronze and Bronze Reflective on top. The fire pit has 10" solid sides which made this a good candidate for the FPPK to be installed on the inside wall. This is a propane fire pit and we do calibrate every valve to every ring we install to eliminate back flow and any problems or issues that may happen. We also install the proper air mixer to insure a clean burn as we eliminate the soot know to be produced by propane. If you have a propane fire pit you know what I am talking about.

fppk 1

fppk 2

fppk 3

fppk 4

fppk 5

fppk 6

fppk 7

fppk 8

24" 1/2 round triple stainless steel pipe 304 stainless steel pipe

The burner below is a propane manual valve with a pilot light. this burner is mounted on a 60" x 30" 1/2 round stainless steel plate which is not included as standard but an option.

The burner itself is a #304 stainless steel 1/2" pipe triple ring burner and can be used for propane or natural gas.

The fireplace below in in Lakeland, Florida and was installed by John Addison for his customer. The fireplace has one of our propane pan burners with a remote control. We built a brushed aluminum surround with out the inner glass per the customer request. The glass that was used was a Gray Base glass with Black and Copper Ruby Red on top.

john 1

As you can see the fireplace was not much to look at until we added our touch.

john 2

john 3

john 4

john 5

You be the judge, We think it turned out wonderful!

john 6

The fireplace below belongs to Ross Barnett in Florida. This was a ventless propane installation. Ross built a front wave design and we built a special wedge pan with the controls underneath. This is a remote control ventless burner. Great job Ross! The glass that was uses was:

Black and Black Reflective

Gray and Gray Reflective

Aquamarine Topper

Copper Blue Topper

Light Blue Tubes

Cobalt Blue Topper

Pale Cobalt Blue Topper

and here are the before and after pictures.

Above is before the wave

and below is the wave before out ventless burner was installed.

What makes us different from anyone else is that we allow you to exercise your imagination. If you see it, dream it, draw it, imagine it we can build it for you. Ross saw what we did for other customers and he came up with this very cool design for us to build for his family room, thanks Ross!

The fireplace below is a propane fireplace with a propane burner and remote control. We used a clear base with Starfire on top. Then we added:

Medium Amber Topping,

Yellow Amber Topper,

Steel Blue Topper,

Dark Red Orange Topper over the base glass. The controls were covered after the install was finished. If you look closely you can see the pilot light assembly.

w 3

w 1

w 2

w 4

The fire pit below is in the Palace of Qatar and this was commissioned for the King of Qatar. The fire pit is a propane/ butane fueled fire pit and it was installed by Gasco of Qatar. They didn't understand the glass so they opted to use lava rock. Now they (the King) have ordered the glass and if we can get the pictures we will post them.

We did propane for the King and there are no issues! Awesome marble!

The fire pit below was built by Charlie Helms in North Carolina using our FPPK (fire pit propane kit) burner. This is a propane fire pit with a lava filler. Charlie is now ready to order the glass. Check it out, great job Charlie!

The fire pit is covered to protect it from whatever may fall. Great job!

The fire pit below was build by Mike Phillips ( a customer). First he ran a propane line to the fire pit area and then blocked his fire pit into shape. We use a FPPK (fire pit propane kit) in an aluminum pan 24" x 24" with a double 18" double stainless steel ring.The glass that was used was a Gray base and Gray Reflective on top to add sparkle.

Below you can see the placement of the thermo coupler and safety pilot light used for propane.

Below on the right side the controls were installed in the bricks.

The fire pit below belongs to Mike DeVito in Northern California. When I saw his idea I was excited to help him create something new and wonderful. He took a very old mining cart in his front yard and we helped him convert it to a propane burning fire pit! Turned out pretty cool! Next he is getting a fire pit cover made to cover it from debris and who else knows what.

We use a FPPK (fire pit propane kit) with valves, thermo coupler, pilot light and air mixer. The glass that was use is:

Starfire base glass over a bed of crushed lava rock,

Yellow Amber Topper

Steel Blue Topper

Turquoise Blue Topper

Green Tubes

Copper Ruby Red Topper

Ice Ice Ice

and of course our Diamonds in Clear, Pink, Amber and Blue.

I think this is one really nice idea!

It is all supplied by this 20 lb propane tank

Here is the mining cart with the base plate installed with the burners

Here you see the controls, air mixer and thermo coupler and pilot light lines under the base plate

You can use a larger (3/4", 1" lava) as a base under our 1/4" crushed lava as this will save you a few dollars.

Now we pour on the crushed lava to keep the glass from sinking into the larger lava.

Add some Starfire

Splash a few colors

Have your spouse light it in case something should go wrong! (Just Kidding)

Again here are the first pictures we saw of the mining cart. Great Idea!

Mike, you did a great job!

The fireplace below is a propane fireplace with a Black Base and Clear Diamonds on top. We built a pan to hold the glass with out the legs and covered/ protected the burner controls inside of the pan. The controls are on the right side and they are shielded and buried under the glass. The customer was going to finish the front of the steel pan after he installed it.

Our products do not require any certification from the AGA, CSA or UL as it is considered a stand-alone product by these agencies. We are told that we would need a certification if sand and or lava rock would need certification. The agencies are franchise operations and they are privately owned and they are not a government agency. These agencies are hired for mass production testing and AGA, CSA and or UL do not certify custom one of a kind projects. Custom burners need no certification as this only applies to production equipment. Just so you can understand that a certification costs about $15,000.00 and certification was developed for production/ mass production to assure quality. Any parts that would normally need AGA or UL do in fact have these approvals. Parts with function need and should have some sort of approval. The pan burners we sell that do have UL, CSA and or any other listings are produced by other companies. The custom pan burners that we produce are just that, custom. Therefore do not require UL, CSA and or any other agency listings as these are custom. The parts that we use to build these pans are UL, CSA listed as they should be. We would never use any “Third World Country” or any unlisted, untested parts to build any products and or parts to endanger any product performance what so ever.

The fireplace below was installed with a dual battery operated 100,000 BTU propane electronic ignition system. Each capable of 100,000 BTU's of fire. The first pictures show what we had to work with and how it progressed.

The glass that was used was Starfire, Gold and Ice Ice Ice.

If this was in your house you would say NASTY!

Burning wood and logs is just nasty and dirty! True story!

Above you can see the soot that come out of the fireplace and and leaves your house smelling so carbon monoxide fresh! YUCK!

Add a bit of lime stone.

A few pieces of copper.

Below you can see the sand bed and the ignition box we built.

Below are the two vent we installed for the air mixers inside of the ignition systems.

and here we are finished. Now isn't that much better litter feller?

Modern times call for modern measures! I guess that's why we are Moderustic!

The fire pit below is in San Francisco California. They use one of out FPPK units.

Here you can see the simple construction.

moxie fire pit 1

A local artist made the glass inlay top. Very cool!

moxie fire pit 2

moxie fire pit 3

moxie fire pit 4

We supplied the FPPK and the Clear glass

moxie fire pit 5

The burner below is one of our FPPK's (fire pit propane kit). With this FPPK we set it up for Black Magic! This was table tested for the pictures. Hopefully the customer will send us pictures after and during installation. We first sent these pictures for the customers approval. Here you go! The pan below belongs to Scott Spector and he finally installed the fire pit in his back yard, WOW, one really nice backyard!

This is one of our propane pan burner with slight modifications.

As you can see around the lower edges it was leaking and yes we did fix this.

The fire pit below was built by Scott Spector in Florida. He started with an FPPK 30 which includes a 30" base plate and a double 24" stainless steel ring. Here we go from the beginning:

SCOTT SPECTOR 3

The propane line was run/ installed under the pavers.

SCOTT SPECTOR 4

SCOTT SPECTOR 8

SCOTT SPECTOR 2

SCOTT SPECTOR 7

SCOTT SPECTOR 10

SCOTT SPECTOR 9

SCOTT SPECTOR 12

SCOTT SPECTOR 15

The colors that were used are

1/2" Clear base,

Black Magic in the center,

Clear Diamonds,

Cobalt Blue Topper,

Clear Topper,

Cobalt Blue Light Topper

and our FPPK 30". That is our 30" propane burner. You can see the actual burner above burning before shipment and installation.

SCOTT SPECTOR 6

We don't have any pictures of the fire pit burning at Scott's but he did tel us that when he fired it up again he would try to send us a few pictures. Thanks Scott.

SCOTT SPECTOR 14

The fire table below was built by Christina "Stina" in the San Francisco area. With a little ambition, imagination and our help, she now has one very nice fire table.

STINA 1

Here is where it started. She made a template of the pan and where the mounting tabs would be located. Then we built the aluminum pan and propane burner for Stina to install.

STINA 2

Below is how the teak table started. We just brought it into the future.

STINA 8

STINA 7

Below the pan was installed with Galaxy Green base glass.

STINA 3

STINA 9

Below you can see the top installed and what a difference.

STINA 13

Below is her wonderfully finished project, Great job Stina!

STINA 14

The Fire Table below was installed in Sacramento California by and for Yard Crashers. The finished pictures will be posted on the Yard Crashers page when this project is installed after 01 20 10. This episode was to be labeled "Outdoor Shower" on HGTV and the DIY Network but somehow it was labeled "Modern Fire Wall" go figure? It is episode 302 on HGTV or DIY Network. The details will be shown on the DIY page when and as soon as we receive them from the producers. We built a square aluminum pan with an 18" double stainless steel ring and used one of our FPPK kits for the propane fuel. This will be shown on the episode coverage as well. Here are the pictures of the back yard and the finished fire table using propane.

Yard Crashers Shower 4

Yard Crashers Shower 5

Yard Crashers Shower 6

Yard Crashers Shower 7

Yard Crashers Shower 8

RV Fire Pits, Portable Propane Fire Pits!

The propane pan below has a brushed finish on the front metal shield. This is a two part shield, one to retain the fireplace glass and second to conceal the controls. This is part of the fireplace design that was asked for. The first pictures shows the front completely up.

Propane Pan 1

Propane Pan 3

The picture below shows the complete front dropped down to access the controls.

Propane Pan 6

Propane Pan 7

Propane Pan 8

The burner below is a propane ribbon burner with all stainless steel construction.

Propane Ribbon 1

Propane Ribbon 3

Propane Ribbon 5

Propane Ribbon 6

Propane Ribbon 7

The pan and all around was filled with glass hiding/ concealing all of the workings.

A ribbon burner will mold all of the flames together making it look like a ribbon of fire.

Propane Ribbon 8

The propane burner conversion below was performed by Richard King of South Carolina.

Richard has one very cool Super Bowl party room! We assisted him in converting a propane fire pit one very nice clean burning fire pit. We will explain as we move along.

Richard King 1

Richard: You did a beautiful job on your gazebo!

Richard King 2

Richard King 3

Here is the fire pit turned up so you can see that we installed one of our FPPK (fire pit propane kit) The tank was under the deck.

Richard King 4

Richard may of had a few flex lines that were a bit too long.

Richard King 6

Richard King 7

It's supposed to look simple when it's finished.

Richard King 5

The controls were adapted to his and over his old controls.

Richard King 8

Richard King 9

Above is on low and I might add no black soot or smoke! You would think the manufactures of these tables would of figured it out by now?

Below is the standard ring but we installed thermo coupler and safety pilot kit.

Richard King 10

Below is what were sent to convert. Small flames and no air mixer what so ever. Just a lot of soot and black smoke, seen it before?

Richard King 12

Below, not a lot of flame is there? The reason is once they turn it up for you, the soot starts to show. So they tell you it can't be turned up.

Richard King 11

Now we step in, air mixed calibrated to the ring and valve system and pilot light and thermo coupler in place.

Richard King 13

On medium!

Richard King 15

and turbo high and still with a clean burn!

Richard King 14

and below is the 2009 Super Bowl Party! Thanks Richard!

Richard King 16

Yes, we can convert anything!

The wine barrel below was build by one of our newer dealers in Texas. Matt's Custom Welding. Contact us for information about Matt's wonderful work. We are going to be much more of Matt's work and look around his showroom in the pictures below. Many more projects to come.

Matts Custom 1

Matts Custom 2

There was a steel bowl installed using our propane system to burn our glass. They used Bronze base glass in the fire pit.

Matts Custom 3

Matts Custom 4

Below you will see how simple it is to convert/ install a propane into your table:

This is our FPPK box with controls and air mixer calibrated to the burner we are using

Mark Koch 1

A better view

Mark Koch 2

The burner on the top side with the thermo coupler, pilot light and battery operated ignitor exposed

Mark Koch 3

Pout teh filler/ lava/ glass? and drink beer! Put a fork in it, Your done!

The fire pit below was constructed by Andrew Jordan in Miami Florida, www.BuenaVistaFlats.com.

We build a 16" x 16" aluminum pan with a 1/2" lip on top. The propane tank was mounted below the table top. Nice and simple feature!

Andrew Jordan 2

If your in the area, send them a line or stop by www.BuenaVistaFlats.com.

Andrew Jordan 1

Propane Burner Issues

I have seen this scenario all too often. The supplier that you have purchased from only cared about making the sale of the glass. They did not ask what you were doing. How you were doing it. What you were working on, etc. etc. etc. They did not ask if you had propane or natural gas or if you had natural gas close by to use opposed to propane. You are now finding out that there is no customer support after the sale. We are the only manufacturre building one propane burner at a time to suit your needs. We care from beginning to end and more importantly after the fact! We offer customer support FOREVER!

Let me tell you how we feel about these other companies selling products they know nothing about:

You purchased a Ford and now you are going to the Cadillac dealer for advice and parts on how to fix the problems. That is not how it works. We need you to put pressure on the company that sold you the product that does not perform as you thought it should. We will and or can resolve your issues, but you need to make sure these companies stop selling products they know nothing about.

Have you contacted the company that you purchased from?

Have you received any advice from this company on how to resolve the issue?

Are they even concerned about your problems?

Did you disclose to this company what you were working on?

Did this company ask for details about your project?

Have you asked if you can return all of the parts and products because of product failure?

Does this company even have any information online about their success on propane burners?

Did you receive any customer support?

Does the company you purchased from even have a physical address where you can visit?

We do genuinely feel bad for the customer being taken advantage of by companies such as these, selling parts and supplies, which they know nothing about.

Please keep us posted on your developments so we may continue to remedy your situation. We are proud of our creations, inventions, customer support, product lines as we do all of this for you, the customer!

This would be step one. Then we would step in and fix your issues.

Ed Jaunzemis President, Moderustic Inc

The next few pictures are from New York by Jai Crandall for Tom Morgan. We can hep transform an eye soar to a place of enjoyment. Just watch!

November 10, 2009
Hello Ed, my name is Jai Crandall and I live in central NY. I have a good friend (Tom Morgan) that has a patio that he generally uses wood to throw some heat for his quests when he entertains. Unfortunately, as I'm sure you know, the smoke can really get to you after a while. This is a very high end home and he entertains for some very important people. He would like to eliminate the wood a replace them with some propane inserts. It doesn't have to look like a fireplace, but most importantly, it needs to throw some intense heat.
    Pictures 1,2 and 3 are the front views of the fire pits and as you will notice they are not square ( each picture is labeled with the dimensions), they don't need to stay like they are, so if you want to make them square you can. Just go by the front measurement. Hopefully you can design something that will fit there needs.
    I am sure that they are going to want electric ignition, and you can try to place the control valves in the front. Also, with the good New York weather, you want want to have covers for each unit.
    Thank You so much for your time and I look forward to working with you to complete this project.

Jai Crandall
July 3, 2010
Now here are the finished pictures on the property. Very nice!
Hey Ed, Here are some pictures of the burners that I installed. They look great and they are very happy with their performance. Also, I believe that I may have a few more people interested in something similar to what I did for Tom Morgan. Have a great forth weekend and I will talk to you soon.

Jai

Jai Crandall Tom Morgan 1

Jai Crandall Tom Morgan 2

Jai Crandall Tom Morgan 3

Jai Crandall Tom Morgan 4

Jai Crandall Tom Morgan 5

Jai Crandall Tom Morgan 6

Jai Crandall Tom Morgan 7

That's what I said when I first saw the project, YUK!!!! I tried to figure out what to do????

Jai Crandall Tom Morgan 8

Jai Crandall Tom Morgan 9

Jai Crandall Tom Morgan 10

Jai Crandall Tom Morgan 11

Jai Crandall Tom Morgan 12

Jai Crandall Tom Morgan 13

Jai Crandall Tom Morgan 14

Jai Crandall Tom Morgan 15

Jai Crandall Tom Morgan 16

Jai came up with the Stainless Steel hollow base design and we went to work.

Jai Crandall Tom Morgan 17

Jai Crandall Tom Morgan 18

Jai Crandall Tom Morgan 19

Jai Crandall Tom Morgan 20

This is a happy ending!

Our propane burners were set to 100,000 btu's each for maximum heat. The glass that we used was Bronze Rust Copper.

The fireplace below belongs to Marcia and here is what we did to update her fireplace:

First here is what your fireplace may looks like now, nasty!

Marcia 1

Marcia 2

We reconfigure the pilot, burner, base plate, venturi and get it to burn properly.

Marcia 3

Nice flames, then we continue.

Marcia 4

If you look below we are showing you proper pilot light placement.

Marcia 5

Marcia 6

Paint is and your done!

The glass that we used was a Starfire base, Bronze Rust Copper and Bronze Reflective on top.

Marcia 7

Marcia 8

If your fireplace does not work this easy or look this simple, then we didn't do it!

Let us help you make your fireplace work right and look good.

Marcia 9

Marcia 10

Here is the answer some of you think you know. (You don't!) These are Air Mixers, Venturis Carburetors.

These like a carburetor on any engine act as the air fuel mixture governor. Have you ever been behind an older car that smells funny? Wrong air mixture! Bad mechanic! The air mixers have to be calibrated not only to the valving but the burner as well. We have been building propane burners for several years now and we have never had an issue with any configuration that we have built, ever. It's the same as porting an engine for proper air flow. If you just STICK one of these on your burner then you may be giving us a call soon enough.

Here are a few pictures of the 1/2" and 3/4" air mixers, (40,000 to 400,000 btu mixers).

Air Mixers L and S 1

Air Mixers L and S 2

Air Mixers L and S 3

Air Mixers L and S 4

If you attach it and create back pressure, you will have a fire or an explosion, guaranteed. We are not trying to frighten you but to make you aware. We believe in safety first and we don't build systems without thermo couples and or pilot light systems, ever!

Air Mixers Large 1

Air Mixers Large 2

As you may have of seen on our "How Not To Do It Page" they still screw up no matter how hard they try. We are here only to help!

The fireplace below is an outdoor fireplace fueled with propane. The remote control (battery operated) is located below by an access panel. We will explain as we move on. Thsi fireplace and Propane Burner was installed in Florida.

Interior Options start 2

Here is the fireplace the flat plate was installed onto.

Interior Options start 1

Propane Burner before the glass.

Interior Options start 3

On the left side notice the access panel for the battery operated remote control.

Interior Options start 4

Interior Options start 5

The entire cover is removed for access to the actual remote control.

Interior Options start 6

Interior Options start 7

Interior Options start 8

This is a pilot light and thermo couple system and capable of and up to 100,000 btu's. The entire plate will be covered with glass when it is finished.

Interior Options start 9

The fireplace below is on the water in Florida. We built a Ribbon Burner for this Propane Burner and equipped it with an Electronic Ignition. All parts that were used were #316 marine grade stainless steel.

The media that was used was a very fine crushed lava.

Mark Cotter Fireplace 5

Mark Cotter Fireplace 4

Mark Cotter Fireplace 3

Mark Cotter Fireplace 2

Mark Cotter was the contractor in Florida who is responsible for this wonderful addition!

Mark Cotter Fireplace 1

The next fire pit below has one of our FPPK's installed. We didn't supply the star burner bur we did get it to burn correctly with a Ford Blue base glass. Then it was Topped with Clear and Blue Diamonds. We will explain as we move on.

Camille and Bill White 1

Below you can see the gas shut off on the left and our FPPK box on the lower right.

Camille and Bill White 2

Camille and Bill White 3

Camille and Bill White 4

Below you now have fire! It was a bit windy but you get the idea.

Camille and Bill White 7

The next fire pit below was built and installed by Kevin Smith.

This is a propane fire pit and we sent the stainless steel burners and Copreci Valve. The burners are and were calibrated to the burner to insure a clean burn. There are so many companies out there who sell propane pans, burners, air mixers along with the glass and when you have any issues, they just seem to run away and leave you holding the bag. We will explain as we move forward.

Kevin Smith 9

Above you see the cinder block hollowed out. You don't need a pan, the block is the pan! Too many times we see this situation and the customer is told they need a pan, why? Ohhhh, because the dealer needs your money more than you do!

Below you see the stainless steel burners on a bed of crushed pea gravel

Kevin Smith 4

Below you can see the Copreci and air mixer mounted to a bracket on the end of the pit. Remember, the air mixer and Copreci have to be calibrated to the burner or it won't work! There is no magic bullet, it's pure and simple knowledge. Propane Burners have to be dealt with great care.

Kevin Smith 5

The glass that was installed was Ford Blue base glass.

Kevin Smith 1

Kevin Smith 2

Kevin Smith 6

Done, simple and nice!

Kevin Smith 7

This next fire pit was built by Tim and Sarah, they simply built this with stacker stones and a bit of ingenuity. The used a crushed lava base with Black Base glass topped with Black Reflective base glass. Then they used a Light Amber Topping to create the Fleur De Lis. This was done with a propane valve that we supplied. They used a wood burning fire bowl for the pit. The tank was accessible from the back of the fire pit.

Tim Sarah Gallagher 6

Add the base crushed lava. Note we do not use the 3/4" size? Way to large for the glass as it will fall through. You can use the larger lava and then over it with the crushed lava to save some cash!

Tim Sarah Gallagher 5

Below if you notice the Pilot Light and Thermo Couple just inside of the ring? This is a must if using propane, for safety.

Tim Sarah Gallagher 2

Tim Sarah Gallagher 3

Tim Sarah Gallagher 1

And your done!

Tim Sarah Gallagher 4

Steve Hinojos (S.B. County Sheriff) built two fire pits using propane. One of which was a Wine Barrel Fire Pit and the other a traditional (oopsies on this one!). We will explain as we move on.

Steve Hinojos 4

We supplied the know how and all of the parts to make his Wine Barrel Fire Pit a success! great job Steve!

Steve Hinojos 3

Steve Hinojos 5

We also supplied Steve with the all of the propane parts to make his fire table work properly as well. It's when we got his pictures that we noticed the ROCKS! You can't burn ROCKS, they EXPLODE! This you can see in teh Famous "How Not To Do It" page. Initially he had no problems but once they took on moisture, sure enough he was back for some safe and sound glass!

Steve Hinojos 2

All in all, great job Steve!

Steve Hinojos 1

Additional Links for Pictures.

Fireplace Pictures

More Pictures

Self Installation Fireplace Pictures

Fire Pit Installation Pictures

Fireplace Paint

Interesting and Cool Fireplace Pictures

Customer Color Creations Fireplace Pictures

More Fireplace Pictures

Fireplace Surrounds Pictures

Even More Fireplace Pictures

Pans, Burners and Baskets Pictures

New Products Pictures

How Not To Do It Fireplace Pictures

HGTV Fireplace Pictures

Even More Fireplace Pictures

Unique Fireplace Pictures

Fire Balls for Fireplace Pictures

Direct Vent Installations for Fireplace Pictures

Before and After Fireplace Pictures

Still More Fireplace Pictures

Installation and Operation Fireplace Pictures

Remotes, Surrounds and Fireplace Pictures

Fireplace Burner Pricing and Pictures

Fireplace Pictures of designED

Ventless Burner Fireplace Pictures

Propane Burner Fireplace Pictures

Propane Burner Self Installation Fireplace Pictures

Black Magic Fireplace Pictures

HGTV Kenneth Brown Fireplace Pictures

Fireplace Paint Pictures

Self Installation Fireplace Pictures

Self Installation Made Easy Fireplace Pictures

What Is An Insert Fireplace Pictures

Electronic Ignitions and Fireplace Pictures

And More Fire Pits And Fireplace Pictures

Why We Are A Green Fuel Source Fireplace Pictures

DIY Network Fire Pit And Fireplace Pictures

Self Install Fireplace Pictures

More Fireplace And Fire Pit Pictures

Ribbon Burners For Fireplace Pictures

Fireplace, Glass And Logs? Pictures

Modernize Your Fireplace Pictures

Custom Fireplace Pictures

Cool Flames Fireplace Pictures

Still Even More Fireplace Pictures

Even More Fire Pit And Fireplace Pictures

Sterling Silver Fireplace Pictures

More Fire Tables, Fire Pits And Fireplace Pictures

Let's Build It Together Fireplace Pictures

More Fireplace And Fire Pit Pictures

More Self Installation Fireplace Pictures

Don't Sweat It, HGTV Fireplace Pictures

Another Picture Page Fireplace Pictures

Fireplace Pictures Fire Pit Pictures

HGTV DIY Fireplace Pictures

links To Even More Fireplace And Fire Pit Pictures

Additional Links for Fire Pits and Fireplaces.

Fire Tables and Fire Pit Pictures

Fire Pit and Fire Table Pictures

Fire Pits Pictures

Fire Pits 2 Pictures

Custom Tables adn Project Pictures

Metal Page Pictures

Portable Fire Pits and Fire Tables Pictures

Still More Fire Pits and Fireplace Pictures

Fire and Water Feature Pictures

Fire Pits and Remote Controls Pictures

Portable Propane Fire Pits Pictures

And More Fireplace and Fire Pit Pictures

Portable RV Fire Pits Pictures

More Fireplace and Fire Pit Pictures

Fire Bowls Pictures

Fire Pit Building Document and Pictures

Fire Pit Covers Pictures

Fire and Water Tables Pictures

Fire Falls Pictures

Fire Tables Pictures

How To Build A Wine Barrel Fire Pit Pictures

How To Build A Propane Fire Pit Pictures

Fireplace Pictures, Fire Pit Pictures

Link To All Of Those Other Fireplace And Fire Pit Pictures

Fireplace Glass, Fireplaces Design, Fire Glass, Fire Pit Glass. Fireglass, Fire Glass, Propane Burner,

Increase your website traffic with Attracta.com

Visit Our Original
E-STORE

Or Visit Our NEW
E-STORE!

Lantern VortexED (moderustic.com)

NEW PRODUCT

Some of Ed's project cars For Sale

INVESTOR PAGE

We Make Fire Cool!

Moderustic® is proud to have been issued 5 U.S. Patent Numbers
and 1 Patent pending status! 5th one just awarded notice of allowance 10/23/2021
Covering our method of creating tumbled tempered glass for use in fireplaces and fire pits.
Patent Applications Published 2005, 2006, 2014 and 2017 (twice). Worlds most infringed PATENT in WORLD HISTORY!

Safe FIREGlass for Fire Pits and Fireplaces

A must see and read!

Our Glass is SAFE and See Why!

We Appreciate Your Comments & Feed Back. Please
Send Your E-mails or Click HERE to Submit a Survey!

Note* When calling for any technical support we ABSOLUTELY
require Digital photos from a camera not your phone.

(909) 989-6129 Fax: 909 944 3811
or E-mail us at
Ed@Moderustic.com | Jaunzemis@msn.com

Need to know how much you need "HOW MUCH DO I NEED PAGE"	Our Crushed Lava can be purchased online "JUST CLICK HERE"
Do you need a Burner? "JUST CLICK HERE"	Our Fireplace Paint can be purchased online "JUST CLICK HERE"

Click "HERE" to see our Carbon Monoxide Report.

Investment and Partner Opportunities

Stop by and visit our Showroom in Rancho Cucamonga:(just north of the Ontario Airport
Moderustic Inc.
9467 Ninth Street Suite #D
Rancho Cucamonga, California 91730
Hours: Monday-Friday 9:00 to 6:00 Closed Saturday and Sunday, Saturday by appointment only.

If you're coming late, please call us and we will stay late. We are 2 miles North of the Ontario Airport
_________________________________________________________________
Moderustic Fabrication University

"CLICK HERE" or on the Picture below

Investment, Employee or Career Opportunities.
_________________________________________________________________

We Make Fire Cool!

Simple Patents (click here)

RETURN POLICY!

Shipping has become an issue so all orders will and must be signed for. No package will be left at your door unless you sign for it. This is called an indirect or direct signature request. It is also refereed to as a Signature service. If a package or packages are left at your door per your request, you will be the responsible party.
All returns must be made within 30 days of purchase with exceptions only by management
Returned products must be unused and/or unmixed
Returned products must be packaged well to avoid damage in transit, or you will be responsible for the damage
Returned products that are damaged in transit will not be able to be refunded
Refunds will be made towards product cost only
Refunds will not be given for non-product labor costs (consulting fees, installation fees, labor, shipping etc.)
Restock fees may apply depending on which items are being returned. (30% to 70%) Glass/ burning products 30%, Burners 50%, Custom Burners 70%, Metal Pans or any Custom Metal Work, Electronics are not returnable ever!

All returns must have a return authorization (we are not responsible for products being shipped to incorrect addresses due to non-compliance of this policy)
No returns or exchanges will be accepted for any custom metal products or electronics what so ever!
No returns will be accepted for ICS/ Fire Falls, or any other standard or custom fire pits.
No returns on products that contain electronics (if they were used or installed)
We are not responsible for local codes and or if any of our products are or are not approved. Please check with your local building department or governing agencies for proper approvals before purchasing. Custom built or designed items are not returnable for any reason. It is your responsibility to make sure our products do not violate your local building codes. We cannot accept returns should you encounter these issues with your local building authorities.
Any Designs, Drawings, PDF Files, Ideas, Pictures, Attachments, Renderings, Facsimiles, Faxes, Blue Prints, Copies, Documents and even copy written materials once sent to Moderustic Inc, Ed Jaunzemis, Aquatic Glassel or any employee of Moderustic Inc becomes property of said company to use, distribute, copy, reproduce, manipulate, recreate, modify, advertise, promote, lay claim to and or use in our discretion as we need. If you do not agree with these terms then please do not send us anything. Our intentions are to create for you the "Customer" and it is our vast collection of material that will spawn an idea for you to have us create something for you. If we should create something/ anything for you that is one of a kind, you do not own any rights to this or there idea or ideas, product or concept in any way shape or form.

To read all company policies, terms and conditions, CLICK HERE!

Propane Prop 65 Warnings

All of the pictures and content are copyright protected on this website: U.S. Copyright Registration No is: VA 1-650-624
Entitled: "Moderustic 1107"
Effective registration date is February 1, 2008.
Has anyone ever told you "Nice Logs" ? Nooo, I don't think so.
CSLB# C-17 693887

US patent numbers #US9700987B1 and US9808905B2

We Make Fire Cool!

Violators will be prosecuted.

Note* When calling for any technical support we ABSOLUTELY (maybe)
require Digital photos from a camera not your phone (if that is all you have, then that's fine).

(909) 989-6129 Fax: 909 944 3811
or E-mail us at
Ed@Moderustic.com | Jaunzemis@msn.com

_________________________________________________

Click HERE or on the Picture below to see our MOVIES!

Click HERE or on the Picture above to see our MOVIES!
_________________________________________________________________

Check out the Car Garden, A fun car page by Ed

We now have "several" Active Patents and a Patent Pending Status. "We were the first to file" (yes we were), is why we have The Patents for FireGlass.

Prop 65 Warning:

WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the state of California to cause cancer, and Carbon Monoxide, Lead and Lead Compounds which are known to the state of Califronia to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
ADVERTENCIA: Este producto puede exponerlo a productos químicos como el plomo y los compuestos de plomo, sabidos por el estado de California como causa de cáncer, y el monóxido de carbono, el plomo y los compuestos de plomo, sabidos por el estado de Califronia como causa de defectos de nacimiento u otros daños reproductivos. Para obtener más información www.P65Warnings.ca.gov.

For any competitors out there, Second place is first loser. Sorry.

See our page for Investors!

Safe FIREGlass for Fire Pits and Fireplaces

A must see and read!

Patent Piracy is not a victimless crime

US active patent numbers US9700987B1 and US9808905B2

5 Patents and patent pending

Visit www.USPTO.GOV for details on Patent infringement

or E-mail us at
Ed@Moderustic.com | Jaunzemis@msn.com