Moderustic Aquatic Glassel Fireplace Glass Rocks Propane Fireplaces
Moderustic Aquatic Glassel Fireplace Glass Rocks Propane FireplacesModerustic Aquatic Glassel Fireplace Glass Rocks Propane Fireplaces

Pans Burners and Baskets Part 2..

The two boxes below are our IPI battery operated electronic ignitions which are 100,000 btu rated. The exterior boxes are for protection from the weather and keep the unit and batteries safe and dry. These are typically installed under the glass in a fire pit out doors or in a sub panel just like our 110 volt electronic 415,000 btu units.

dual 1

dual 3

On the left you can see the gas lines, one in and one out along with a 60" IPI lead (Intermittent Pilot Ignition). This allows the ignition system to be 60" away from the flames if required.

dual 4

 

 

 

The fireplace below is the fireplace of "Bill" and he wasn't sure where the burners went. So he put them on top and as you can see he should of put them under the glass.
bill hall 1
Bill ordered a rectangular pan and it would of looked better if we would of built a trapezoid shape pan to contour the fireplace. Bill did drop his burners under the glass. This was a propane ventless conversion. Looks much better than those log thingies! Hopefully Bill will send us pictures of it finished and burning, maybe. We used Starfire glass in the pan.
bill hall 2

The next several pictures are of a 24" x 54" x 3 1/2" deep triangle pan with our first Ribbon Burner! It lays in a bed of Black Silicone Carbide "Black Magic"

ribbon 7

ribbon 6

ribbon 5

The flames measured 24" tall below! Because of the design we implied to this new burner they seem to be coming from nowhere!

ribbon 4

We didn't fill the pan with sand just because. These ribbon burners will be available very soon and we will post dozens more pictures as we have time to post them for you to see. The will be available in steel or stainless steel. With or with out a pan. This burner was built for another customer in Palm Springs for their fireplace and we will post pictures of it as well.

ribbon 3

ribbon 2

This pan will be installed in a custom table built by the customer in Palm Springs.

ribbon 1
The stainless steel pan burner below has a 24" stainless steel star burner installed and it is connected to our 110 volt electronic ignition. This is a propane burner.
star 1
star 2
star 3
star 4
star 5
We then covered it with our Starfire to test for soot and as you can see, a clean burn.
star 6
The pan below is a stainless steel pan with a 3/4" lip on top and it sits on 4" round brushed front legs. We will post pictures of the finished pan with glass when we get them.
round legs 3
round legs 2
round legs 1
The fireplace below has a stainless steel pan installed with a ribbon burner. The front legs of the pan are 4" round brushed legs with our standard legs in the back. Here you can see the different flame patterns of our ribbon burner. We then installed a brushed aluminum surround.
The first 3 pictures are of the fireplace before we started on it. The wall was built out 8" for the flat screen above the fireplace.
reddish 1
reddish 2
reddish 3
The next 4 pictures are of our ribbon burner after fabrication.
reddish 4
reddish 5
reddish 6
reddish 7
Now we pour on Starfire to help conceal the burner.
reddish 8
reddish 9
reddish 10
Our ribbon burners can actually raise the flames quite a bit!
reddish 11
reddish 12
reddish 13
This is one of our smaller 18" ribbon burners.
reddish 14
The pan is now installed in the fireplace.
reddish 15
reddish 17
reddish 18
reddish 19
Add a little fire
reddish 20
reddish 21
reddish 22
reddish 23
reddish 24
reddish 25
reddish 26
Now we install the surround to finish this fireplace off!
reddish 27
reddish 28
reddish 29
reddish 30
reddish 31
reddish 32
reddish 33
reddish 34
reddish 35
What we do is very simple, we listen to the customers needs and build from their imagination.
reddish 36

The pan below is a stainless steel pan with a 415,000 btu electronic ignition installed under the pan. It's what the customer wanted. It's like hooking your car up the the shuttle for more power. This pan was installed in Nipomo/ Pismo Beach California, Shea Homes and we get up there we will take finished pictures as we installed 6 other fireplace which we will take pictures of as well.

415 1

The front stainless skirt hide the control box which is 4" tall.

415 2

415 3

415 4

415 5

415 6

 

The fireplace below belongs to Ross Barnett in Florida. This was a ventless propane installation. Ross built a front wave design and we built a special wedge pan with the controls underneath. This is a remote control ventless burner. Great job Ross! The glass that was uses was:
Black and Black Reflective
Gray and Gray Reflective
Aquamarine Topper
Copper Blue Topper
Light Blue Tubes
Cobalt Blue Topper
Pale Cobalt Blue Topper
and here are the before and after pictures.
ross 12
ross 11
Above is before the wave
and below is the wave before out ventless burner was installed.
ross 10
ross 9
ross 5
ross 8
ross 7
ross 6
ross 3
ross 2
What makes us different from anyone else is that we allow you to exercise your imagination. If you see it, dream it, draw it, imagine it we can build it for you. Ross saw what we did for other customers and he came up with this very cool design for us to build for his family room, thanks Ross!
ross 1
Below is one of the two Fire Sticks we built in Nopomo, California at the Shea Homes Trilogy project. Each fireplace had an electronic ignition located on the side of the fireplace in a cabinet inset into the side of the fireplace.
fire sticks 1

 

 

We have over the last few years helped design and and sold dozens of custom fireplaces. The one here was installed in Beverly Hills, California. We designed the fireplace, custom candle pan burner with electronic ignition. We used a clear base glass fro a simple a modern look. We will be posting the pictures as we have time in the near future.
daniel 1
We did the fireplace not the white onyx. What we did does not show but it's what made the fireplace what it is, designED !
daniel 3
daniel 4
daniel 6
daniel 7
If you take the time to notice the nice texture of the glass. It's because we tumble it (patent pending) that's what also make us and our glass different from anyone else.
daniel 8
daniel 9
daniel 13

 

The Zig Zag burner below was designed by the customer and it measures 6" x 18" and is made from stainless steel tubing. The burner can be used as a propane burner or a natural gas burner.
zig zag 1
zig zag 2
zig zag 3
zig zag 4
zig zag 5
zig zag 6
The fire pit below was build by Mike Phillips ( a customer). First he ran a propane line to the fire pit area and then blocked his fire pit into shape. We use a FPPK (fire pit propane kit) in an aluminum pan 24" x 24" with a double 18" double stainless steel ring.The glass that was used was gray with a gray base and gray reflective on top to add sparkle.
mike phillips 1
Below you can see the placement of the thermo coupler and safety pilot light used for propane.
mike phillips 2
Below on the right side the controls were installed in the bricks.
mike phillips 3
mike phillips 4
Below is one of our newest designs of fireplace pans. This one was designed by the customer for propane and they added remote control. This first pan will be made in Stainless Steel. We will finish this proto type in about 4 to 5 weeks and we will post pictures when we finish. These will be available in stainless steel, steel (painted or bare) or any other metal you desire.
new pan 2
new pan 1
The fireplace below is a propane fireplace with a Black base and Clear Diamonds on top. We built a pan to hold the glass with out the legs and covered/ protected the burner controls inside of the pan. The controls are on the right side and they are shielded and buried under the glass. The customer was going to finish the front of the steel pan after he installed it.
norm 1
 
 
The fire pit below is in Marksville Louisiana and is at the Paragon Casino. The fire pit had an 18' fire ring installed in #304 stainless steel. The was done in and aluminum trough with 10 individual center feed burners.  The gas line was a 1 1/2" and 5 lbs of pressure at 7" water column on natural gas. The ignition system is a Honeywell Infrared Flame Detection system. We will post more information on these larger fire features.
KOJIS 1
KOJIS 2
The big white ball is actually the Pearl of Louisiana. 
KOJIS 3
KOJIS 4
Below is the fire ring in its trough surrounded by the water feature. 
KOJIS 6
KOJIS 7
KOJIS 8
Below is one of the sections with the stainless steel burners. The complete feature is filled with water all around the fire ring. 
KOJIS 9
KOJIS 10
 
The pan below is a stainless steel pan made to the same size as the fireplace. We installed a front curtain to hide the controls. This is a propane ventless burner pan. We will post pictures when the customer sends them to us after the installation.
large ventless ss pan 1
We installed a 30" double burner in the middle. The maximum btu's on a ventless is 38,000 and any larger burner will make the flames much smaller.
large ventless ss pan 2
Below the customer wanted sculpted front legs.
large ventless ss pan 3
large ventless ss pan 4
Below you see the front curtain in stainless steel.
large ventless ss pan 5
large ventless ss pan 6
large ventless ss pan 7
large ventless ss pan 8
and here you have it burning with out the glass
large ventless ss pan 9
 
This stainless steel burner was designed and built by one of our dealers, Todd Janssen in Orange County, California. If you dream it, we can build it! This was build for a custom shaped fire pit.
 todd 1
 
The fireplace below was installed by George Foote who also built his own pan, great job! We supplied the burners and glass and George supplied the talent and labor. Great job George! The colors used were:
Starfire base glass,
Azurlite,
Azurlite Reflective,
Gray base glass,
and our Ice Ice Ice and you be the judge!
Before the pan and glass.
george 1
Here is the stainless steel pan that George built.
george 2
Start with Starfire.
george 3
Add some Azurlite.
george 4
george 5
and the rest of the colors for one nice design from George!
george 6
george 7
george 8
george 9
george 10
 
The ribbon burner below is made from 1/8" brushed stainless steel. The center was water jet cut and then we bent  the two center fins down to install the ribbon burner with electronic ignition. The base  plate measured 94" x 26" and was installed in San Diego, California. The architect is Kelly Crain of San Diego.
strausse 6
strausse 5
Hopefully we will be sent the finished pictures of the fireplace.
strausse 4
strausse 3
strausse 2
We can build these in any size, shape, material and in natural gas or propane.
This was tested in the shop with a minimal of 1/4 lb of natural gas. This burner is capable of at least an 18" ribbon burn. If you look in the center you will see the ignition head for the electronic ignition.
strausse 1

The fireplace below has a steel pan underneath to conceal the 12 volt remote control. We used a Clear base glass and topped it with a Starfire base glass and then added Amber Diamonds on the surface.

Jim Malless 1

Jim Malless 2

Jim Malless 3

You can see the front plate that was painted to match which is removable if and when necessary to change the batteries. The legs were 4 1/2" and the pan was 2" tall. The removable front metal curtain was 6 1/2" tall.

Jim Malless 4

Jim Malless 5

 
 
 
 
Our products do not require any certification from the AGA, CSA or UL as it is considered a stand-alone product by these agencies. We are told that we would need a certification if sand and or lava rock would need certification. The agencies are franchise operations and they are privately owned and they are not a government agency. These agencies are hired for mass production testing and AGA, CSA and or UL do not certify custom one of a kind projects. Custom burners need no certification as this only applies to production equipment. Just so you can understand that a certification costs about $15,000.00 and certification was developed for production/ mass production to assure quality. Any parts that would normally need AGA or UL do in fact have these approvals. Parts with function need and should have some sort of approval. The pan burners we sell that do have UL, CSA and or any other listings are produced by other companies. The custom pan burners that we produce are just that, custom. Therefore do not require UL, CSA and or any other agency listings as these are custom. The parts that we use to build these pans are UL, CSA listed as they should be. We would never use any “Third World Country”  or any unlisted, untested parts to build any products and or parts to endanger any product performance what so ever.
The fire pit below was built to the customers specs. It was 48" round, 10" tall with 8" legs and constructed from 1/4" aluminum. Then powder coated to match the customers request. We will fill in the details as we go.
New York Fire Pit 1
New York Fire Pit 2
New York Fire Pit 3
Above you can see the cross grid to support the false bottom.
New York Fire Pit 5
Above you can see the false bottom making it possible to fill it with a 2" fill over the ring.
New York Fire Pit 6
A custom 42" stainless steel burner had to be built.
New York Fire Pit 7
New York Fire Pit 8
The center leg was for the gas and electrical for the electronic ignition
New York Fire Pit 9
Hopefully we will get pictures of the fire pit installed on top of the water fall in New York.
                                   
The fireplace below had a steel pan built so we could conceal the 12 volt battery operated electronic ignition
beneath the pan. The glass that was installed was:
Clear base glass under the Starfire base glass Topped with Amber Diamonds.
Jim Malless 1
Jim Malless 2
Jim Malless 3
Above and below you can see the solid cover as it hangs over the face to conceal the remote control ignition.
Jim Malless 4
Jim Malless 5
We built a set of fire stick for an architect "Woody Dike" on the Nipomo, California project (seen above) a few years ago. Then Woody contacted us to build a set for him. He even sent us a drawing and included a diorama!
Check it out and tell us what you think!
Here is the blue print:
Woody Dike 9
and diorama:
Woody Dike 10
Woody is over the top!
Woody Dike 11
Woody Dike 1
Above and below you can see the control valves at the bottom of the Fire Sticks.
Woody Dike 2
Below after installing and fine tuning the gas flow they then covered the base with sand and then topped it with Black Magic and several toppers.  Awesome job Woody!
Woody Dike 8
                                                                                                                                                    

The pan below was created by John Webber of San Diego. He made a cardboard mock up of what he wanted in his fireplace and we duplicated it in stainless steel. Here is  John's fireplace now, our pan and we will posts pictures of the finished fireplace with our  pan when John sends them to us. The glass that was installed in this pictures of the pan is Pink Rosa base glass.

Pan For John  9

Pan For John 8

Pan For John 1

Pan For John 2

Pan For John 3

Pan For John 4

Pan For John 5

Pan For John 7

The propane pan below has a brushed finish on the front metal shield. This is a two part shield, one to retain the fireplace glass and second to conceal the controls. This is part of the fireplace design that was asked for. The first pictures shows the front completely up.

Propane Pan 1

 

Propane Pan 3

The picture below shows the complete front dropped down to access the controls.

Propane Pan 6

Propane Pan 7

Propane Pan 8

 

The burner below was a custom 14" hexagon designed burner by our customer for their fire pit.

Hex Burner 1

Hex Burner 2

Hex Burner 4

Hex Burner 8

The burner below is a propane ribbon burner with all stainless steel construction.

Propane Ribbon 1

Propane Ribbon 3

Propane Ribbon 5

Propane Ribbon 6

Propane Ribbon 7

The pan and all around was filled with glass hiding/ concealing all of the workings.

A ribbon burner will mold all of the flames together making it look like a ribbon of fire.

Propane Ribbon 8

 

The burner below is a rectangular burner specified by the customer.

Square 2

For some reason they ordered 2 1/2" legs underneath, so we just did it!

Square 1

 

Below you will see how simple it is to convert/ install a propane into your table:

This is our FPPK box with controls and air mixer calibrated to the burner we are using

Mark Koch 1

A better view

Mark Koch 2

The burner on the top side with the thermo coupler, pilot light and battery operated ignitor exposed

Mark Koch 3

Pour the filler/ lava/ glass? and drink beer! Put a fork in it, Your done!

Mark Koch 4
Here are two interesting new style burner pictures! These are floating flames! It's our pan burner/ manifold with Floating Flames!See other burners in our "Pans Burners and Baskets" page!
Floating Flames 2
Float on!
Floating Flames  1

The next few pictures are from New York by Jai Crandall for Tom Morgan. We can hep transform an eye soar to a place of enjoyment. Just watch!

November 10, 2009
Hello Ed, my name is Jai Crandall and I live in central NY.  I have a good friend (Tom Morgan) that has a patio that he generally uses wood to throw some heat for his quests when he entertains.  Unfortunately, as I'm sure you know, the smoke can really get to you after a while. This is a very high end home and he entertains for some very important people.  He would like to eliminate the wood a replace them with some propane inserts. It doesn't have to look like a fireplace, but most importantly, it needs to throw some intense heat.
    Pictures 1,2 and 3 are the front views of the fire pits and as you will notice they are not square ( each picture is labeled with the dimensions), they don't need to stay like they are, so if you want to make them square you can. Just go by the front measurement. Hopefully you can design something that will fit there needs.
    I am sure that they are going to want electric ignition, and you can try to place the control valves in the front. Also, with the good New York weather, you want want to have covers for each unit.       
    Thank You so much for your time and I look forward to working with you to complete this project.
 
Jai Crandall
July 3, 2010
 Now here are the finished pictures on the property. Very nice!
Hey Ed,  Here are some pictures of the burners that I installed. They look great and they are very happy with their performance. Also, I believe that I may have a few more people interested in something similar to what I did for Tom Morgan.  Have a great forth weekend and I will talk to you soon.
 
Jai

Jai  Crandall Tom Morgan 1

Jai Crandall Tom Morgan 2

Jai Crandall Tom Morgan 3

Jai Crandall Tom Morgan 4

Jai Crandall Tom Morgan 5

Jai Crandall Tom Morgan 6

Jai Crandall Tom Morgan 7

That's what I said when I first saw the project, YUK!!!! I tried to figure out what to do????

Jai  Crandall Tom Morgan 8

Jai Crandall Tom Morgan 9

Jai Crandall Tom Morgan 10

Jai Crandall Tom Morgan 11

Jai Crandall Tom Morgan 12

Jai Crandall Tom Morgan 13

Jai Crandall Tom Morgan 14

Jai Crandall Tom Morgan 15

Jai Crandall Tom Morgan 16

Jai came up with the Stainless Steel hollow base design and we went to work.

Jai  Crandall Tom Morgan 17

Jai Crandall Tom Morgan 18

Jai Crandall Tom Morgan 19

Jai Crandall Tom Morgan 20

This is a happy ending!

Our propane burners were set to 100,000 btu's each for maximum heat. The glass that we used was Bronze Rust Copper.

The fire pit below was built and designed by Brett Parks in Indiana.  Brett came to us to help hm create his water fire feature for his back yard and be able to winterize it during their frigid winters. The glass he used was a:
Clear base glass,
E.D Scarlett Diamonds,
E.D. Clear Diamonds.
We then built a custom shape stainless steel burner to fit his idea. We will explain as we go.
Here is his original concept drawing:
Parks 11
Below is his layout with pavers, electrical and gas line coming up.
Parks 1
6" deep water tank.
Parks 2
Parks 3
Stack a few more pavers.
 Parks 4
Let's test it!
Parks 5
Parks 6
A custom size and configuration ring was fabricated.
Parks 7
Now your done!
Parks 8
Parks 9
Parks 10

 

The pan burner below was built for Lisa Powell on the east coast. She requested a cover when she was not using it. We tested it with V Blue base glass and V Blue Reflective base glass. If your dream it, we can build it!

Lisa Powell 1

Lisa Powell 2

Lisa Powell 3

Lisa Powell 4

Lisa Powell 5

Lisa Powell 6

 

 

Additional Links for Pictures.

Fireplace Pictures

More Pictures

Self Installation Fireplace Pictures

Fire Pit Installation Pictures

Fireplace Paint

Interesting and Cool Fireplace Pictures

Customer Color Creations Fireplace Pictures

More Fireplace Pictures

Fireplace Surrounds Pictures

Even More Fireplace Pictures

Pans, Burners and Baskets Pictures

New Products Pictures

How Not To Do It Fireplace Pictures

HGTV Fireplace Pictures

Even More Fireplace Pictures

Unique Fireplace Pictures

Fire Balls for Fireplace Pictures

Direct Vent Installations for Fireplace Pictures

Before and After Fireplace Pictures

Still More Fireplace Pictures

Installation and Operation Fireplace Pictures

Remotes, Surrounds and Fireplace Pictures

Fireplace Burner Pricing and Pictures

Fireplace Pictures of designED

Ventless Burner Fireplace Pictures

Propane Burner Fireplace Pictures

Propane Burner Self Installation Fireplace Pictures

Black Magic Fireplace Pictures

HGTV Kenneth Brown Fireplace Pictures

Fireplace Paint Pictures

Self Installation Fireplace Pictures

Self Installation Made Easy Fireplace Pictures

What Is An Insert Fireplace Pictures

Electronic Ignitions and Fireplace Pictures

And More Fire Pits And Fireplace Pictures

Why We Are A Green Fuel Source Fireplace Pictures

DIY Network Fire Pit And Fireplace Pictures

Self Install Fireplace Pictures

More Fireplace And Fire Pit Pictures

Ribbon Burners For Fireplace Pictures

Fireplace, Glass And Logs? Pictures

Modernize Your Fireplace Pictures

Custom Fireplace Pictures

Cool Flames Fireplace Pictures

Still Even More Fireplace Pictures

Even More Fire Pit And Fireplace Pictures

Sterling Silver Fireplace Pictures

More Fire Tables, Fire Pits And Fireplace Pictures

Let's Build It Together Fireplace Pictures

More Fireplace And Fire Pit  Pictures

More Self Installation Fireplace Pictures

Don't Sweat It, HGTV Fireplace Pictures

Another Picture Page Fireplace Pictures

Fireplace Pictures Fire Pit Pictures

HGTV DIY Fireplace Pictures

links To Even More Fireplace And Fire Pit Pictures

 

Additional Links for Fire Pits and Fireplaces.

Fire Tables and Fire Pit Pictures

Fire Pit and Fire Table Pictures

Fire Pits Pictures

Fire Pits 2 Pictures

Custom Tables adn Project Pictures

Metal Page Pictures

Portable Fire Pits and Fire Tables Pictures

Still More Fire Pits and Fireplace Pictures

Fire and Water Feature Pictures

Fire Pits and Remote Controls Pictures

Portable Propane Fire Pits Pictures

And More Fireplace and Fire Pit Pictures

Portable RV Fire Pits Pictures

More Fireplace and Fire Pit Pictures

Fire Bowls Pictures

Fire Pit Building Document and Pictures

Fire Pit Covers Pictures

Fire and Water Tables Pictures

Fire Falls Pictures

Fire Tables Pictures

How To Build A Wine Barrel Fire Pit Pictures

How To Build A Propane Fire Pit Pictures

Fireplace Pictures, Fire Pit Pictures

Link To All Of Those Other Fireplace And Fire Pit Pictures

Save

Increase your website traffic with Attracta.com
 Online Payment Service
 
 
 Fire Glass, Fireplaces, Fireplace Design, Glass Fireplace, Fireplace Glass, Seattle, Romantic Fires, Fire Pits, Contemporary Fireplace, Fire Bowls, Amazing Flames NW, Outdoor Fire, Fireplace Outdoor, Outdoor Fireplace, Fire Pit Ideas, DIY fire pits, fire pit glass, HGTV Fire Pits, Amazing Glass Products for your Fireplace or Fire Pit.
 
Click here to go to our "HOW MUCH DO I NEED PAGE"
.
Do you need a Fireplace Pipe Burner? "JUST CLICK HERE"
.
Our Crushed Lava can be purchased on line, "JUST CLICK HERE"
.
Our Fireplace Paint can be purchased on line "JUST CLICK HERE"
 
.
Play or Filler Sand can be purchased locally as this will save you shipping.
.
Call us direct at 909-989-6129
 
 
 
 

Any questions please contact us at:
Direct: 909-989-6129


E-Mail:




We are now designing a national catalog which should be 130 to 150 pages! We are asking for your help in acquiring pictures of fireplaces and fire pits for our catalog that our glass was used in. We would also appreciate your comments and or feed back as well.

Join us on our Facebook Page!

Facebook 200 

Join us on Pinterest and Share our Ideas!

 

Has anyone ever told you "Nice Logs" ? Nooo, I don't think so.
Paten Approved # US7,976,360 B2
Aquatic Glassel by Moderustic.
We take pride in our products and take Patent Infringement very seriously! There are several companies who have copied our product and or process. They are in for a big surprise.

 

Please take note that in the United States reasonable royalties can begin to accrue when a
Patent Application publishes, (as Moderustic Inc has in June of 2005 and in May of 2006) depending on the state of the patent application at the time of issuance.
Please take note that Moderustic does intend to enforce their patent rights to the furthest extent of the law upon issuance of the patent.

Patent
Application publication available on request. Don't be fooled by look-a-likes or overly expensive imitations, ask for Aquatic Glassel by Moderustic. Be sure to get a price quote and you'll see the difference.
   

We are proud to offer the consumer over 500 products. Moderustic knows they have spawned a few undesirable competitors in the market place but we continue on our quest for betterment and greater success through you the customer. We have been criticized for offering the crushed lava rock and or filler method by all of these other companies. But we understand the wants and needs of the customer, you. Spend less and get more. Some of these companies are telling the consumer to not use filler, why? They only want to fill their pockets with your money and we want you to save money. We know we have devastated these companies with our filler saving methods but it is with the best intentions for the consumer in mind. Moderustic has refused to sell to these individuals and companies because of their business practices. So please understand their intentions when they want you to purchase more glass. We take pride in our new product and take Patent Infringement very seriously! There are several companies who have copied our product and or process and they will be in for a surprise when our patent number becomes available to the public. If you are a previous or new customer and would like to add your comments on these companies or your experience, we will post a blog page for these to be read by the public. If you would like to post just your comments, they are welcome as well. Again, we work for the consumer and not the competition.

Send your comments to
We will be posting photos on Facebook. Please post your photos on Facebook:

 

Find Us On Facebook


Return Policy


AmazingGlassFlames.com Return Policy and Legal Notices
•    Returns must be made within 30 days of purchase with exceptions only by management.
•    Returned products must be unused and/ or unmixed.
•    Returned products must be packaged well to avoid damage in transit, OR YOU WILL BE RESPONSIBLE FOR THE DAMAGE.
•    Returned products that are damaged in transit will not be able to be refunded.
•    Refunds will be made towards product cost only.
•    Refunds will not be given for non-product labor costs (consulting fees, installation fees, labor, shipping etc.)
•    Restock fees may apply depending on which items are being returned. (30% to 70%)

Glass/ burning products 30%, Burners 50%, Custom Burners 70%, Metal Pans or any Custom Metal Work, Electronics are not returnable ever!

•    Refunds are processed after customer’s review and acceptance of refunded amount.
•    Refunds take approximately 1 week for processing less any customer delays.
•    Any return must have a return authorization in writing by the management and this will be noted.
•    There are no returns or refunds on any custom metal products what so ever!
•    We are not responsible for local codes and or if any of our products are or are not approved. Please check with your local building department or governing agencies for proper approvals before purchasing. Custom built or designed items are not returnable for any reason.
•    Any Designs, Drawings, PDF Files, Ideas, Pictures, Attachments, Renderings, Facsimiles, Faxes, Blue Prints, Copies, Documents and even copy written materials once sent to Amazing Flames Northwest, LLC, amazingglassflames.com, Rich Favors or any employee of Amazing Flames Northwest, LLC becomes property of said company to use, distribute, copy, reproduce, manipulate, recreate, modify, advertise, promote, lay claim to and or use in our discretion as we need.  If you do not agree with these terms then please do not send us anything. Our intentions are to create for you the "Customer" and it is our vast collection of material that will spawn an idea for you to have us create something for you. If we should create something/ anything for you that is one of a kind, you do not own any rights to this or there idea or ideas, product or concept in any way shape or form.
•    EXPEDITED SHIPPING NOTICE
(i.e. 2/ 3-Day Select, Next Day/ 2nd Air, etc.):
If UPS/ FedEx fails to deliver your packages within the expedited delivery time frame you have chosen, they can or will refund a PORTION of the delivery charges.  We will pass 100% of the UPS/ FedEx refund back to you.  The amount refunded is determined by UPS/ FedEx and will be less than the original expedited shipping charge that you originally paid. This is due to surcharges and fuel charges. We do not determine what will be credited back.
Click Here to see additional Terms and Conditions!


    * All orders charged in full are to be deemed Custom. All custom orders are charged 100% in full.

Copyright 2005 All Rights Reserved.

All of the pictures and content are copy written on this website:

U.S. Copyright Registration No is: VA 1-650-624

Entitled: "Moderustic 1107" 

Effective registration date is February 1, 2008.

Violators will be prosecuted.


                                                                                                              

Click here to view our website's sitemap!

 

 

 

Save

Moderustic Aquatic Glassel Fireplace Glass Rocks Propane Fireplaces